Braeburn 5-2 Day Programmable Thermostat

ແນະນຳ

This manual provides comprehensive instructions for the installation, operation, programming, and maintenance of your Braeburn 5-2 Day Programmable Thermostat. Please read this manual thoroughly before attempting to install or operate your new thermostat.

ຮູບທີ 1: ດ້ານໜ້າ view of the Braeburn 5-2 Day Programmable Thermostat, showing the large blue backlit display, system mode switch, fan mode switch, and programming buttons.

ຄຸນສົມບັດ

• 5-2 Day Programmability
• ຂະໜາດໃຫຍ່ 2 ຕາແມັດ ໃນ. ຈໍສະແດງຜົນດ້ວຍໄຟ Backlight ສີຟ້າສົດໃສ
• ຂີດຈຳກັດອຸນຫະພູມທີ່ສາມາດປັບໄດ້
• Hardwire or Battery Powered (24V AC)
• ຫນ່ວຍຄວາມຈໍາຖາວອນຮັກສາການຕັ້ງຄ່າ
• Filter Check Monitor
• ຄວາມແຕກຕ່າງຂອງອຸນຫະພູມທີ່ສາມາດປັບໄດ້
• ໂໝດການຟື້ນຕົວແບບປັບຕົວໄດ້ (ARM)
• ESD Guard ວົງຈອນເອເລັກໂຕຣນິກ
• ການປົກປ້ອງວົງຈອນສັ້ນຂອງ Compressor
• ຍົກເລີກໂຄງການຊົ່ວຄາວ
• ຮູບແບບການຖືແບບຂະຫຍາຍແບບໂປຣແກຣມ
• ປຸ່ມຣີເຊັດການເຂົ້າເຖິງດ້ານໜ້າ
• F° / C° Switch

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

• ຄຳເຕືອນ: Disconnect power to the heating and cooling system before installing or servicing the thermostat.
• ການຕິດຕັ້ງຄວນໄດ້ຮັບການປະຕິບັດໂດຍນັກວິຊາການທີ່ມີຄຸນວຸດທິ.
• Ensure wiring complies with local electrical codes.

ສະຖານທີ່ຕິດຕັ້ງ

Install the thermostat on an inside wall, approximately 5 feet (1.5m) above the floor. Avoid locations near heat sources (lamps, sunlight, fireplaces), drafts (windows, doors), or unconditioned spaces (unheated hallways, outside walls).

ຄໍາແນະນໍາສາຍໄຟ

ເຄື່ອງຄວບຄຸມອຸນຫະພູມນີ້ຖືກອອກແບບມາສຳລັບເຄື່ອງຄວບຄຸມອຸນຫະພູມດ່ຽວtage (1 Heat/1 Cool) systems. It can be powered by 24V AC hardwire or batteries.

Typical Terminations: Rc, Rh, O, B, Y1, W1, G, C

1. Turn off power to the HVAC system at the circuit breaker.
2. ເອົາເຄື່ອງຄວບຄຸມອຸນຫະພູມເກົ່າອອກຈາກແຜ່ນຕິດຝາ.
3. Label each wire with the terminal designation from your old thermostat.
4. Mount the new thermostat base plate to the wall.
5. Connect the labeled wires to the corresponding terminals on the new thermostat. Refer to the wiring diagram provided with your thermostat for specific connections.
6. Insert 2 AA alkaline batteries (not included) into the battery compartment if using battery power or as a backup.
7. Attach the thermostat body to the base plate.
8. ຄືນພະລັງງານໃຫ້ກັບລະບົບ HVAC.

ໃຊ້ເຄື່ອງຄວບຄຸມອຸນຫະພູມຂອງທ່ານ

ສະຫຼັບໂໝດລະບົບ

Located on the front of the thermostat, this switch controls the overall operation mode:

• ເຢັນ: ເຄື່ອງຄວບຄຸມອຸນຫະພູມຈະເຮັດວຽກຂອງລະບົບເຮັດຄວາມເຢັນຂອງທ່ານ.
• ປິດ: ລະບົບຄວາມຮ້ອນ ແລະ ລະບົບເຮັດຄວາມເຢັນຖືກປິດ.
• ຄວາມຮ້ອນ: ເຄື່ອງຄວບຄຸມອຸນຫະພູມຈະເຮັດວຽກຂອງລະບົບຄວາມຮ້ອນຂອງທ່ານ.

ສະຫຼັບໂໝດພັດລົມ

Located on the front of the thermostat, this switch controls the fan operation:

• ອັດຕະໂນມັດ: ພັດລົມຈະເຮັດວຽກເມື່ອລະບົບຄວາມຮ້ອນ ຫຼື ລະບົບເຮັດຄວາມເຢັນເປີດໃຊ້ງານເທົ່ານັ້ນ.
• ເປີດ: The fan runs continuously, regardless of heating or cooling calls.

ການຕັ້ງຄ່າອຸນຫະພູມ

ໃຊ້ UP ແລະ ລົງ arrow buttons on the right side of the display to adjust the desired temperature (setpoint). The display will show both the current room temperature and the setpoint.

Programming (5-2 Day)

The 5-2 day programming allows you to set different schedules for weekdays (Monday-Friday) and weekends (Saturday-Sunday). Each day can have up to 4 program periods: Morning, Day, Evening, and Night.

ກໍານົດເວລາແລະມື້

1. ກົດ ໂຄງການ button once. The display will show the current time flashing.
2. ໃຊ້ UP or ລົງ ລູກສອນເພື່ອປັບເວລາ.
3. ກົດ ໂຄງການ again to advance to the day setting. The day will flash.
4. ໃຊ້ UP or ລົງ ລູກສອນເພື່ອປັບມື້.
5. ກົດ ໂຄງການ or wait 15 seconds to exit.

Setting Program Schedule

1. ກົດ ໂຄງການ button until "MON-FRI" appears and the time for the first period (Morning) flashes.
2. ໃຊ້ UP or ລົງ arrows to set the desired time for the Morning period.
3. ກົດ ໂຄງການ. The temperature for the Morning period will flash.
4. ໃຊ້ UP or ລົງ ລູກສອນເພື່ອກໍານົດອຸນຫະພູມທີ່ຕ້ອງການ.
5. Repeat steps 2-4 for the Day, Evening, and Night periods for "MON-FRI".
6. After setting the "MON-FRI" schedule, press ໂຄງການ to advance to "SAT-SUN" and repeat the process for weekend programming.
7. ກົດ ກັບຄືນ or wait 15 seconds to exit programming mode.

ຍົກເລີກໂຄງການຊົ່ວຄາວ

To temporarily change the temperature without affecting the program, simply use the UP or ລົງ arrows. The thermostat will hold this temperature until the next program period begins.

ຖືຖາວອນ

ກົດ ຖື button. The thermostat will maintain the current temperature indefinitely. To cancel, press ຖື ອີກເທື່ອຫນຶ່ງຫຼືກົດ ໂຄງການ ເພື່ອສືບຕໍ່ກຳນົດເວລາ.

ບໍາລຸງຮັກສາ

ການປ່ຽນແບັດ

When the battery indicator appears on the display, replace the 2 AA alkaline batteries immediately to ensure proper operation and prevent loss of settings. The thermostat has permanent memory, so settings will be retained during battery replacement.

1. ຄ່ອຍໆດຶງຕົວເຄື່ອງຄວບຄຸມອຸນຫະພູມອອກຈາກແຜ່ນຕິດຝາ.
2. ເອົາແບັດເກົ່າອອກ.
3. Insert new AA alkaline batteries, observing polarity (+/-).
4. ແນບຕົວເຄື່ອງຄວບຄຸມອຸນຫະພູມກັບຄືນໃສ່ແຜ່ນຕິດຝາ.

ທໍາຄວາມສະອາດ

ເຮັດຄວາມສະອາດເຄື່ອງຄວບຄຸມອຸນຫະພູມດ້ວຍເຄື່ອງອ່ອນ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.

Filter Check Monitor

The thermostat may feature a filter check monitor that reminds you to change your air filter. Consult your HVAC system manual for recommended filter replacement intervals.

ການແກ້ໄຂບັນຫາ

If problems persist, contact a qualified HVAC technician or Braeburn customer support.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation included with your product or visit the official Braeburn webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

ຜູ້ຜະລິດ: ເບຣເບີນ