ແນະນຳ
ຂອບໃຈສໍາລັບການຊື້asing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp ໄດ້ຖືກອອກແບບເພື່ອສະຫນອງ ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
ຂໍ້ມູນຄວາມປອດໄພ
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- ໃຊ້ພຽງແຕ່ bulbs ຂອງປະເພດທີ່ກໍານົດໄວ້ແລະ wattage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- ນີ້ lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- ຮັບປະກັນ lamp is placed on a stable, level surface to prevent tipping.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
ເນື້ອໃນຊຸດ
ກະລຸນາກວດສອບວ່າມີອົງປະກອບທັງໝົດຢູ່ກ່ອນເລີ່ມປະກອບ:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp ເຕົ້າສຽບ)
- Hardware Pack (screws, washers, etc., if applicable)
- ສາຍໄຟ
ການຕິດຕັ້ງແລະການປະກອບ
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Unpack ອົງປະກອບ: ເອົາຊິ້ນສ່ວນທັງໝົດອອກຈາກເຄື່ອງຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ ແລະ ວາງອອກເທິງພື້ນຜິວທີ່ສະອາດ, ອ່ອນນຸ້ມເພື່ອປ້ອງກັນຮອຍຂີດຂ່ວນ.
- ປະກອບ Poles: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- ແນບຖານ: Securely attach the assembled poles to the brushed steel lamp ພື້ນຖານ.
- ຕິດຕັ້ງຊັ້ນວາງ: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- ຄັດຕິດ Lamp ເຕົ້າຮັບ: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp ເຕົ້າຮັບ.
- ໃສ່ດອກໄຟ: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp ປລັກສຽບ. ຢ່າຮັດແໜ້ນເກີນໄປ.
- ຕໍາແໜ່ງ Lamp: ວາງ lamp in its desired location, ensuring the power cord is not pinched or obstructed.
ຮູບທີ 2: ລາຍລະອຽດຂອງ lamp's base and shades.
ຄໍາແນະນໍາການດໍາເນີນງານ
- ການເຊື່ອມຕໍ່ພະລັງງານ: ສຽບ lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- ເປີດ/ປິດ: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ເພື່ອເຮັດຄວາມສະອາດ lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- ການທົດແທນດອກໄຟ: ຖອດປລັກ lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Lamp ບໍ່ເປີດ | 1. ລamp ບໍ່ໄດ້ສຽບໃນ. 2. Bulb is loose or burnt out. 3. Power outlet is not functioning. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| ແສງສະຫວ່າງ flickers. | 1. ຫລອດໄຟ. 2. Incorrect bulb type/wattage. 3. bulb faulty. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp ບໍ່ໝັ້ນຄົງ. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. ຍ້າຍ lamp ກັບພື້ນຜິວທີ່ຮາບພຽງ, ຄົງທີ່. 2. Re-tighten all pole connections. |
ຂໍ້ມູນຈໍາເພາະ
- ໝາຍເລກຕົວແບບ: 4305-22
- ຂະໜາດ (D x W x H): 11.7"D x 14"W x 68"H
- ນ້ໍາຫນັກລາຍການ: 15.2 ປອນ
- ປະເພດວັດສະດຸ: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- ສີຮົ່ມ: ສີຂາວ
- ຈຳນວນແຫຼ່ງແສງ: 3
- Bulb Base: E26 ຂະຫນາດກາງ
- ວັດtage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- ປະເພດສະຫຼັບ: Pull Chain (3 individual switches)
- ແຫຼ່ງພະລັງງານ: ໄຟຟ້າສາຍ
- ຄວາມຍາວສາຍ: Approximately 5 feet (60 inches)
- ປະເພດການຕິດຕັ້ງ: ອິດສະລະ
- ການນໍາໃຊ້ພາຍໃນ / ນອກ: Indoor ເທົ່ານັ້ນ
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
ຂໍ້ມູນການຮັບປະກັນ
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
ການຊ່ວຍເຫຼືອລູກຄ້າ
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso webເວັບໄຊສໍາລັບການສະຫນັບສະຫນູນ.
Adesso ຢ່າງເປັນທາງການ Webເວັບໄຊ: www.adeshome.com