Furman P-8 PRO C Power Conditioner Instruction Manual

1. ບົດແນະນຳ

The Furman P-8 PRO C is a professional-grade power conditioner designed to provide advanced protection and clean power for your valuable audio, video, and electronic equipment. It incorporates Furman's exclusive Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), ແລະ Extreme Voltage Shutdown (EVS) to safeguard against power surges, spikes, and AC line noise, ensuring optimal performance and longevity of your connected devices.

2. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Always connect the P-8 PRO C to a properly grounded 20-amp ປ່ຽງໄຟຟ້າ.
• Do not overload the unit. The total current draw of all connected equipment must not exceed 20 amps.
• ຮັບປະກັນການລະບາຍອາກາດທີ່ເໝາະສົມອ້ອມຮອບເຄື່ອງ. ຢ່າປິດກັ້ນຊ່ອງລະບາຍອາກາດໃດໆ.
• Keep liquids away from the unit.
• ຂໍ້ສະເໜີ 65 ຄຳເຕືອນ: ຜະລິດຕະພັນນີ້ອາດຈະມີສານເຄມີທີ່ລັດ California ຮູ້ຈັກເພື່ອເຮັດໃຫ້ເກີດມະເຮັງແລະຄວາມຜິດປົກກະຕິໃນການເກີດລູກຫຼືຜົນຮ້າຍຕໍ່ການຈະເລີນພັນອື່ນໆ.

3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

3.1. Advanced Protection Technologies

• ຊຸດ Multi-Stage Protection (SMP): Furman's SMP circuit provides superior surge suppression, absorbing and dissipating damaging transient voltages without sacrificing itself. This ensures continuous protection for your equipment.
• Linear Filtering Technology (LiFT): LiFT significantly reduces AC line noise across a wide frequency range, delivering cleaner power to your sensitive electronics. This results in improved audio clarity and video resolution.
• ທີ່ສຸດ Voltage Shutdown (EVS): The EVS circuit continuously monitors incoming voltage. If it detects an unsafe overvoltage condition (exceeding 137 volts), it automatically shuts down the connected equipment to prevent damage, then restores power once voltage ກັບຄືນສູ່ລະດັບທີ່ປອດໄພ.

3.2. Outlets and Power

• ຮ້ານຄ້າທັງໝົດ: 9 (1 front-panel convenience outlet, 8 rear-panel outlets).
• Rear Outlets: ອອກແບບດ້ວຍ ample spacing to accommodate 'wall wart' power supplies and feature security strapping to prevent accidental disconnections.
• ສາຍໄຟ: Integrated 10-foot, 12-gauge power cord.
• Ampອາຍຸ: 20-amp capacity, requiring a 20-amp female receptacle or a Furman ADP-1520B adapter for connection.

3.3. ຄຸນສົມບັດເພີ່ມເຕີມ

• ຕົວເຊື່ອມຕໍ່ BNC: A BNC connector is located on the rear panel for optional GN-LED or GN-I gooseneck lights (sold separately) to illuminate the rear of your rack.
• ການອອກແບບ Rack-Mountable: Standard 1U rack-mount chassis for easy integration into professional setups.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1. ການຕິດຕັ້ງ Rack

The P-8 PRO C is designed for standard 1U rack installation. Secure the unit using appropriate rack screws (not included) through the mounting ears on both sides of the front panel. Ensure sufficient space for ventilation.

4.2. ການເຊື່ອມຕໍ່ພະລັງງານ

1. Connect the integrated 10-foot, 12-gauge power cord from the P-8 PRO C to a dedicated 20-amp, 120-volt AC grounded electrical outlet. If a 20-amp receptacle is not available, use a Furman ADP-1520B adapter.
2. Ensure the main power switch on the front panel of the P-8 PRO C is in the OFF position before connecting any equipment.

4.3. Connecting Equipment

Plug your audio, video, or electronic equipment into the 8 rear-panel outlets and the 1 front-panel convenience outlet. Utilize the wide spacing of the rear outlets for larger power adapters. For critical equipment, consider using the security strapping to prevent accidental unplugging.

4.4. Optional Gooseneck Lights

If desired, connect optional Furman GN-LED or GN-I gooseneck lights to the BNC connector on the rear panel for rack illumination.

5. ການດໍາເນີນງານ

5.1. ເປີດ / ປິດພະລັງງານ

Once all equipment is connected, flip the main power switch on the front panel to the ON position. The P-8 PRO C will power on, and connected equipment will receive conditioned and protected power.

5.2. ໄຟຕົວຊີ້ວັດ

• Protection OK (Green LED): This indicator illuminates green when the SMP circuit is active and providing surge protection. If this light is off, the unit's surge protection has been compromised, and the unit should be serviced.
• ທີ່ສຸດ Voltage (ໄຟ LED ສີແດງ): This indicator illuminates red when the incoming voltage exceeds safe operating levels (above 137 volts). The EVS circuit will shut down power to connected equipment until the voltage ກັບຄືນສູ່ຂອບເຂດທີ່ປອດໄພ.

6. ບໍາລຸງຮັກສາ

The Furman P-8 PRO C is designed for reliable, maintenance-free operation. No user-serviceable parts are inside. For cleaning, disconnect the unit from the power source and wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. ການແກ້ໄຂບັນຫາ

7.1. No Power to Outlets

• Check the main power switch on the front panel to ensure it is in the ON position.
• Verify that the P-8 PRO C is securely plugged into a functioning 20-amp ຝາຜະຫນັງ.
• Check the circuit breaker on the P-8 PRO C (usually located near the power cord input) and reset if tripped.
• If the 'Extreme Voltage' indicator is lit, the incoming voltage is too high. The unit will automatically restore power when conditions normalize.
• If the 'Protection OK' indicator is off, the surge protection circuit may be compromised. Discontinue use and contact Furman support.

7.2. Audio/Video Noise

• ໃຫ້ແນ່ໃຈວ່າອຸປະກອນທັງຫມົດຖືກຮາກຖານຢ່າງຖືກຕ້ອງ.
• ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍເຄເບີ້ນວ່າງ.
• The LiFT technology in the P-8 PRO C is designed to reduce AC line noise. If noise persists, try isolating the source of the noise by unplugging devices one by one.

8. ຂໍ້ມູນຈໍາເພາະ

9. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

• 1 x Furman P-8 PRO C Power Conditioner

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Furman products are backed by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Furman webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.