HOTONE TANLA1

Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp ຄູ່ມືຜູ້ໃຊ້ຫົວຫນ້າ

Model: TANLA1 | Brand: HOTONE

1. ບົດແນະນຳ

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

  • Ultra-compact, portable ampຫົວ​ຫນ້າ lifier​.
  • Inspired by the legendary Vox AC30 amplifier tone.
  • Separate Volume and Gain control knobs.
  • EQ 3 ແບນ (ເບສ, ກາງ, ສູງ) ສຳລັບການສ້າງສຽງ.
  • Integrated FX Loop for external effects integration.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

  • ການສະຫນອງພະລັງງານ: Use only the specified 18V DC power adapter (center negative). Incorrect voltage ສາມາດທໍາລາຍຫນ່ວຍງານ.
  • ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.
  • ຄວາມຊຸ່ມ: Keep the unit away from water or excessive moisture.
  • ຄວາມຮ້ອນ: ຫຼີກເວັ້ນການວາງເຄື່ອງໄວ້ໃກ້ກັບແຫຼ່ງຄວາມຮ້ອນ ຫຼືຢູ່ໃນແສງແດດໂດຍກົງ.
  • ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດດ້ວຍຜ້າແຫ້ງເທົ່ານັ້ນ.
  • ການບໍລິການ: ຢ່າພະຍາຍາມໃຫ້ບໍລິການຫນ່ວຍນີ້ດ້ວຍຕົວທ່ານເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.

3. ຜະລິດຕະພັນເກີນview

Hotone Nano Legacy British Invasion Ampຫົວຫນ້າ lifier

ຮູບພາບ: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

ແຜງຄວບຄຸມດ້ານໜ້າ:

Hotone Nano Legacy British Invasion Front Panel Diagram

ຮູບພາບ: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

  1. ການປ້ອນຂໍ້ມູນ: 1/4" mono jack for connecting your guitar.
  2. ເບສ: Controls the low frequency response of your tone.
  3. ກາງ: Controls the mid frequency response of your tone.
  4. ຫຼັກການ: Controls the high frequency response of your tone.
  5. ໄດ້ຮັບ: Controls the pre-amp gain level, affecting distortion and sustain.
  6. ກຳ ມະບານ: ຄວບຄຸມປະລິມານຜົນຜະລິດໂດຍລວມຂອງ ampມີຊີວິດຊີວາ.
  7. ປຸ່ມເປີດ/ປິດ: ເປີດ ຫຼື ປິດເຄື່ອງ.

ການເຊື່ອມຕໍ່ແຜງດ້ານຫຼັງ:

Hotone Nano Legacy British Invasion Rear Panel Diagram

ຮູບພາບ: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

  1. 18V ຊິງຕັນດີຊີ: Power input for the included 18V DC adapter (center negative).
  2. ໂທລະສັບ/ສາຍອອກ: 1/8" stereo jack for headphones or direct recording.
  3. AUX ໃນ: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
  4. FX LOOP ກັບຄືນ: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
  5. ສຽງອອກຂອງລຳໂພງ: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
  6. FX LOOP ສົ່ງ: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. ການຕິດຕັ້ງ ແລະການເຊື່ອມຕໍ່

  1. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
  2. ການເຊື່ອມຕໍ່ກີຕາ: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
  3. ການເຊື່ອມຕໍ່ລຳໂພງ: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. ຄຳເຕືອນ: ຢ່າປະຕິບັດການ amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
  4. ຫູຟັງ/ສາຍອອກ (ທາງເລືອກ): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
  5. ຂາເຂົ້າ AUX (ທາງເລືອກ): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
  6. FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. ຄໍາແນະນໍາການດໍາເນີນງານ

  1. ເປີດ: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
  2. ການຕັ້ງຄ່າເບື້ອງຕົ້ນ: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
  3. ການ​ປັບ​ຄ່າ​ໄດ້​ຮັບ​: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
  4. ປັບລະດັບສຽງ: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
  5. Tone Shaping with EQ:
    • ເບສ: Adjust for low-end warmth and fullness.
    • ກາງ: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
    • ຫຼັກການ: Adjust for brightness and clarity.
  6. ປິດພະລັງງານ: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. ບໍາລຸງຮັກສາ

  • ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າແຫ້ງທີ່ອ່ອນໆເພື່ອເຮັດຄວາມສະອາດພາຍນອກ ampເຄື່ອງເຮັດຄວາມເຢັນ. ຢ່າໃຊ້ນໍ້າຢາເຮັດຄວາມສະອາດ, ນໍ້າຢາສີດ ຫຼື ຕົວລະລາຍ.
  • ການເກັບຮັກສາ: ເກັບຮັກສາໄວ້ amplifier ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງແລ້ງຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ຮ້າຍໄປ.
  • ການຂົນສົ່ງ: ໃນເວລາຂົນສົ່ງ, ຮັບປະກັນ ampເຄື່ອງດູດອາກາດຖືກຫຸ້ມຫໍ່ຢ່າງປອດໄພເພື່ອປ້ອງກັນຄວາມເສຍຫາຍທາງກາຍະພາບ.
  • ການດູແລສາຍໄຟ: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ບໍ່ມີສຽງອອກ
  • ໄຟບໍ່ໄດ້ເຊື່ອມຕໍ່ ຫຼືເປີດ.
  • Guitar cable faulty or not fully inserted.
  • Speaker cable faulty or not fully inserted.
  • ລຳໂພງ impedance ບໍ່ກົງກັນ.
  • Volume/Gain knobs set to minimum.
  • Headphones connected to PHONES/LINE OUT.
  • ກວດສອບການເຊື່ອມຕໍ່ພະລັງງານ ແລະ ສະວິດເປີດ/ປິດ.
  • Ensure guitar cable is secure and functional.
  • Ensure speaker cable is secure and functional.
  • Verify speaker impedance is 4-16Ω.
  • Increase Volume and Gain.
  • Disconnect headphones if using speaker output.
Excessive hum or noise
  • Faulty power supply or ground loop.
  • ການຕັ້ງຄ່າການໄດ້ຮັບສູງ.
  • ການລົບກວນຈາກອຸປະກອນເອເລັກໂຕຣນິກອື່ນໆ.
  • Single-coil pickups (inherently more susceptible to hum).
  • Try a different power outlet or a high-quality isolated power supply.
  • ຫຼຸດຜ່ອນການຕັ້ງຄ່າ gain.
  • ຍ້າຍ amplifier ຫ່າງຈາກເອເລັກໂຕຣນິກອື່ນໆ.
  • Consider using humbucker pickups or a noise gate pedal.
ສຽງບິດເບືອນ ຫຼືສຽງອ່ອນ
  • ສາຍໄຟຜິດພາດ.
  • Incorrect speaker connection.
  • ລໍາໂພງເສຍຫາຍ.
  • ສັນຍານເຂົ້າຮ້ອນເກີນໄປ.
  • ກວດສອບ ແລະ ປ່ຽນສາຍໄຟຖ້າຈຳເປັນ.
  • Ensure speaker cable is correctly connected and speaker impedance is correct.
  • Test with a different speaker if possible.
  • Reduce output from guitar or preceding pedals.

8. ຂໍ້ມູນຈໍາເພາະ

ຕົວແບບ:TANLA1
ຜົນຜະລິດວັດtage:5 ວັດ
ແຫຼ່ງພະລັງງານ:Corded Electric (18V DC, center negative)
ອຸປະກອນທີ່ເຂົ້າກັນໄດ້:ກີຕ້າ
ປະເພດຕົວເຊື່ອມຕໍ່:1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
ນ້ໍາຫນັກລາຍການ:15.5 ອອນສ໌ (ປະມານ 440 ກຣາມ)
ຂະໜາດຜະລິດຕະພັນ:2.34 x 5.03 x 2.95 ນິ້ວ (ປະມານ 5.9 x 12.8 x 7.5 ຊມ)
ປະເພດວັດສະດຸ:ສະແຕນເລດ
ສີ:ດຳ

9. ຂໍ້ມູນການຮັບປະກັນ

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

10. ການຊ່ວຍເຫຼືອລູກຄ້າ

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webເວັບໄຊ.

Visit Hotone Audio Support Page (ຕ. ຢample link, link ຕົວຈິງອາດຈະແຕກຕ່າງກັນ)

© 2024 HOTONE. All rights reserved.