ແນະນຳ
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
ຂໍ້ມູນຄວາມປອດໄພ
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- ກົນໄກການ Latch
- Strike plate (ASA Strike)
- ສະກູຕິດ
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. ການກະກຽມປະຕູ
Ensure your door is prepared with the following standard dimensions:
- Cross Bore: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- backset: 2-3/4 ນິ້ວ (70 ມມ)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Secure the latch with the provided screws.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- ຍຶດແຜ່ນຮັບປະຕູໃຫ້ແໜ້ນດ້ວຍສະກູທີ່ໃຫ້ມາ.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
ຄໍາແນະນໍາການດໍາເນີນງານ
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
ໝາຍເຫດ: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ການເຮັດວຽກທີ່ລຽບງ່າຍຂອງກະແຈຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດພື້ນຜິວພາຍນອກດ້ວຍຄວາມອ່ອນໂຍນ, ງamp ຜ້າ. ຫຼີກລ່ຽງນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ, ເຊິ່ງສາມາດທໍາລາຍສີໄດ້.
- ການລະບາຍສີ: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- ການກວດກາ: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຄັນບັງຄັບແຂງ ຫຼື ຍາກທີ່ຈະໝຸນ. | ການສະສົມຂອງຝຸ່ນຫຼືການຂາດການ lubrication. | Clean the mechanism and apply graphite lubricant. |
| ສະກູບໍ່ຫົດເຂົ້າຄືນໄດ້ໝົດ. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 129002 |
| ຊຸດ | 2500 ຊຸດ |
| ປະເພດລັອກ | Cylindrical Passage Lock (Non-locking) |
| ວັດສະດຸ | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| ຈົບ | Satin Chrome |
| ແບບ Lever | Withnell |
| ແບບຫລັງ | 2-3/4 ນິ້ວ (70 ມມ) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| ທິດທາງມື | ບໍ່ແມ່ນມື |
| ເກຣດ | Grade 2 (Standard Duty Commercial) |
| ແຜ່ນປະທ້ວງ | ການໂຈມຕີ ASA |
| ອົງປະກອບລວມ | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
ຂໍ້ມູນການຮັບປະກັນ
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
ການຊ່ວຍເຫຼືອລູກຄ້າ
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webເວັບໄຊ: Visit the official Hager webເວັບໄຊສໍາລັບຊັບພະຍາກອນສະຫນັບສະຫນູນແລະຂໍ້ມູນການຕິດຕໍ່.
- ຕິດຕໍ່: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.