i-tec USB 2.0 to 10/100 Fast Ethernet Adapter User Manual

1. ບົດແນະນຳ

The i-tec USB 2.0 Fast Ethernet Adapter provides an external 100/10Mbps network connection via a USB interface. This adapter allows you to add a network card to your computer, notebook, or tablet without requiring an external power supply. It supports a wide range of operating systems, including Windows, macOS, Linux, ChromeOS, and Android. For Android systems, Ethernet support must be integrated by the device manufacturer, which can typically be verified in the device's Network Connection Settings.

2. ເນື້ອໃນຊຸດ

ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດມີຢູ່ໃນຊຸດຂອງທ່ານ:

• i-tec USB 2.0 Fast Ethernet Adapter
• ຄູ່ມືຜູ້ໃຊ້
• Driver & Manuals CD (Note: Drivers are often automatically installed by modern operating systems.)

3. ຄຸນສົມບັດ

The i-tec USB 2.0 Fast Ethernet Adapter offers the following features:

• ການເຊື່ອມຕໍ່: USB 2.0 Type A male port for host connection and RJ-45 port for Ethernet cable connection.
• ຄວາມໄວເຄືອຂ່າຍ: Supports 10/100Mbps Fast Ethernet.
• ພະລັງງານ: Powered directly via the USB port; no external power supply required.
• ການໂອນຂໍ້ມູນ: Supports Full-Duplex and Half-Duplex transfers.
• ຟັງຊັນຂັ້ນສູງ: Includes Wake-on-LAN (WoL) and Stand-by-Mode functions.
• ຕົວຊີ້ບອກສະຖານະ: Features an LED display (green/yellow) for network status.
• ຊິບເຊັດ: Utilizes an Axis AX88772B chipset with SRAM for efficient data transfers.
• ຄວາມເຂົ້າກັນໄດ້ຂອງລະບົບປະຕິບັດການ: Compatible with Windows XP, 7 (32/64 bit), 8 (32/64 bit), macOS 10.6-10.8, Android 1.x/2.x/3.x/4.x, and Linux kernel 2.6.14 and above.

4. ຕັ້ງຄ່າ

Follow these steps to set up your i-tec USB 2.0 Fast Ethernet Adapter:

1. ເຊື່ອມຕໍ່ຫາອຸປະກອນໂຮສ: Plug the USB 2.0 Type A connector of the adapter into an available USB port on your computer, notebook, or compatible Android device.
2. ການຕິດຕັ້ງໄດເວີ: In most modern operating systems (Windows 10/11, recent macOS, Linux distributions), the necessary drivers will install automatically upon connection (Plug & Play). If automatic installation does not occur, or if you are using an older OS, you may need to install drivers from the included CD or download them from the i-tec webເວັບໄຊ.
3. ເຊື່ອມຕໍ່ກັບເຄືອຂ່າຍ: Connect a standard Ethernet (RJ-45) cable from your router, modem, or network switch to the RJ-45 port on the i-tec adapter.
4. ຢືນຢັນການເຊື່ອມຕໍ່: Observe the LED indicators on the adapter. A solid or blinking LED typically indicates a successful network connection and activity. Check your operating system's network settings to confirm the Ethernet connection is active.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once the adapter is successfully installed and connected, it functions as a standard Ethernet network interface. Your operating system will automatically detect and utilize the wired connection for internet access or local network communication.

• ສະຖານະເຄືອຂ່າຍ: The green/yellow LED on the adapter indicates network link status and activity. A solid light typically means a link is established, while a blinking light indicates data transfer.
• ປຸກລະບົບໃນເຄືອຂ່າຍ (WoL): If supported by your computer's BIOS/UEFI and operating system settings, the adapter can receive a 'magic packet' to wake your computer from a low-power state over the network.
• Stand-by-Mode: The adapter is designed to operate efficiently in low-power states.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your i-tec USB 2.0 Fast Ethernet Adapter, consider the following:

• ບໍ່ມີການເຊື່ອມຕໍ່ເຄືອຂ່າຍ:
  • Ensure the adapter is firmly plugged into a working USB port on your device.
  • Verify that the Ethernet cable is securely connected to both the adapter and your router/modem.
  • Check the LED indicators on the adapter. If they are off, try a different USB port or cable.
  • Restart your computer and network equipment (router/modem).
• Drivers Not Installing:
  • For Windows, check Device Manager for unrecognized devices and attempt to update drivers.
  • Install drivers manually from the provided CD or the i-tec support webເວັບໄຊ.
• ຄວາມໄວການເຊື່ອມຕໍ່ຊ້າ:
  • Ensure your Ethernet cable is not damaged.
  • Verify that your network equipment (router/modem) is functioning correctly.
  • This adapter supports 10/100Mbps Fast Ethernet. If you expect Gigabit speeds, this adapter is not designed for that.
• ຄວາມເຂົ້າກັນໄດ້ຂອງອຸປະກອນ Android:
  • Not all Android devices support USB Ethernet adapters. Check your device's specifications or network settings for 'Ethernet' options.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

i-tec products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official i-tec website. For technical support, driver downloads, or further assistance, please visit the i-tec support section on their official webເວັບໄຊ.