1. ບົດແນະນຳ
The Orbit 94886 Pocket Star Ultima is a digital irrigation controller designed for indoor use, capable of managing up to 6 watering stations. This manual provides comprehensive instructions for the installation, programming, and operation of your new irrigation timer, ensuring efficient and effective watering for your landscape. Its user-friendly interface, featuring a large LCD display and intuitive buttons, simplifies the programming process.
2. ຂໍ້ມູນຄວາມປອດໄພ
- This controller is designed for indoor use only. Do not install it outdoors or in areas exposed to direct weather conditions.
- ໃຫ້ແນ່ໃຈວ່າການປິດການສະຫນອງພະລັງງານກ່ອນທີ່ຈະດໍາເນີນການສາຍຫຼືການບໍາລຸງຮັກສາ.
- Use only the specified 24V AC power adapter. Using an incorrect power supply can damage the unit and void the warranty.
- Keep the controller away from water sources and high humidity to prevent electrical hazards.
- Do not attempt to open or repair the controller yourself. Refer all servicing to qualified personnel.
3. ເນື້ອໃນຊຸດ
Your Orbit 94886 Pocket Star Ultima package should contain the following item:
- One (1) Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller.
4. ຜະລິດຕະພັນເກີນview
The Orbit Pocket Star Ultima controller features a clear LCD display, intuitive navigation buttons, and a rotary dial for easy program selection. The terminal block for wiring is located at the bottom of the unit, protected by a removable cover.
ຮູບ 4.1: ດ້ານຫນ້າ view of the Orbit 94886 Pocket Star Ultima controller, showing the LCD screen, control buttons, and rotary dial.
Figure 4.2: The controller with its bottom cover attached, illustrating its compact design.
5. ຕັ້ງຄ່າ
5.1. ການຕິດຕັ້ງ
The Orbit 94886 controller is designed for indoor installation. Choose a clean, dry location away from direct sunlight and extreme temperatures. Mount the unit securely to a wall using appropriate screws and anchors.
ຮູບທີ 5.1: ຕົວຢ່າງample installation diagram, showing the indoor controller connected to an outdoor irrigation valve.
5.2. ສາຍໄຟ
Before wiring, ensure the power supply to the controller is disconnected. The terminal block is located at the bottom of the unit. Use simple tool-less "push-in" terminals for easy wire connections.
- Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled "COM". This is typically a white wire.
- Station Wires (1-6): Connect each individual valve wire to its corresponding station terminal (1 through 6).
- Rain Sensor (SENSOR): If using a rain sensor (sold separately), connect its wires to the "SENSOR" terminals. The controller supports a normally closed rain sensor.
- Pump Start Relay (PUMP): If you have a pump start relay or master valve, connect its wires to the "PUMP" terminals.
- 24V AC Power (24VAC): Connect the 24V AC power adapter wires to the "24VAC" terminals.
ຮູບທີ 5.2: ລາຍລະອຽດ view of the wiring terminal block, showing connections for 24VAC, SENSOR, COM, stations 1-6, and PUMP.
Important Power Limitation Warning:
The controller's power supply has specific current limitations. Each valve connected should not exceed 150mA (milliampere) at 24V. The total current drawn by all simultaneously active valves must not exceed 500mA. For example, if your valves draw 150mA each, you can operate a maximum of 3 valves simultaneously. If your valves draw 220mA each, you can operate a maximum of 2 valves simultaneously. Exceeding these limits can damage the controller.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
The controller features a rotary dial to select different functions and buttons for navigation and setting values.
Figure 6.1: Controller interface with a guide to button and dial functions.
6.1. ຟັງຊັນໜ້າປັດໝຸນ
- ຕັ້ງໂມງ: Used to set the current time and day.
- ກຳ ນົດວັນທີ: Used to set the current year, month, and day.
- ເວລາເລີ່ມຕົ້ນ: Used to set the start times for your watering programs.
- ເວລາແລ່ນ: Used to set the duration for each watering station (1 to 99 minutes).
- ເລື້ອຍໆເທົ່າໃດ: Used to set the watering frequency (e.g., specific days of the week, odd/even days).
- ອັດຕະໂນມັດ: The default operating mode where programmed schedules run automatically.
- ປິດ: Disables all watering programs and functions.
6.2. ການທໍາງານຂອງປຸ່ມ
- ຕື່ມ: Confirms a setting or moves to the next step.
- ຄູ່ມື: Initiates manual watering.
- ລ້າງ: Clears a setting or program.
- LAYົນຕົກຊ້າ: Activates the rain delay function (24, 48, or 72 hours).
- PROGRAM A-B: Switches between independent programs (A, B, C). The controller supports 3 independent programs.
- +/- ປຸ່ມ: Adjust numerical values up or down.
- ປຸ່ມລູກສອນ (ຊ້າຍ/ຂວາ): Navigate through settings or stations.
6.3. Programming Your Controller
- ກຳນົດເວລາ ແລະ ວັນທີປັດຈຸບັນ: ຫັນ ໜ້າ ປັດໄປຫາ ຕັ້ງໂມງ ແລະ ກຳ ນົດວັນທີ. Use the +/- buttons to adjust values and ENTER to confirm.
- ເລືອກໂຄງການ: ກົດ PROGRAM A-B button to select Program A, B, or C. Each program can have up to 4 start times.
- ກຳນົດເວລາເລີ່ມຕົ້ນ: ຫັນ ໜ້າ ປັດໄປຫາ ເລີ່ມເວລາ. Use the +/- buttons to set up to four start times for the selected program. Press ENTER after each time.
- ກຳນົດເວລາແລ່ນ: ຫັນ ໜ້າ ປັດໄປຫາ ໄລຍະເວລາແລ່ນ. Use the arrow buttons to select each station (1-6) and the +/- buttons to set the watering duration (1-99 minutes) for that station. Press ENTER after each.
- ຕັ້ງຄ່າຄວາມຖີ່ຂອງການຫົດນ້ຳ: ຫັນ ໜ້າ ປັດໄປຫາ ເລື້ອຍໆເທົ່າໃດ. Select specific days of the week, or choose odd/even day watering. Use the arrow and +/- buttons to make your selections.
- ເປີດໃຊ້ໂຄງການ: ຫັນ ໜ້າ ປັດໄປຫາ ອັດຕະໂນມັດ to enable the programmed schedule.
6.4. ການດໍາເນີນງານຄູ່ມື
To water manually, turn the dial to ອັດຕະໂນມັດ, ຈາກນັ້ນກົດທີ່ ຄູ່ມື button. Use the arrow buttons to select the desired station and the +/- buttons to set the run time. Press ENTER to start manual watering. The controller will return to automatic mode after the manual cycle is complete.
6.5. ຟັງຊັນການລ່າຊ້າຝົນ
If rain is expected or has occurred, you can temporarily suspend watering. Turn the dial to ອັດຕະໂນມັດ, ຈາກນັ້ນກົດທີ່ ຝົນຕົກຊ້າ button. Use the +/- buttons to select a delay of 24, 48, or 72 hours. The controller will automatically resume the programmed schedule after the delay period.
7. ບໍາລຸງຮັກສາ
- ຮັກສາຕົວຄວບຄຸມໃຫ້ສະອາດ ແລະ ບໍ່ມີຝຸ່ນ ແລະ ສິ່ງເສດເຫຼືອ. ໃຊ້ຜ້າອ່ອນໆ ແລະ ແຫ້ງເພື່ອທຳຄວາມສະອາດ.
- Ensure the installation area remains dry and protected from moisture.
- ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນປອດໄພ.
- During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.
8. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຈໍສະແດງຜົນຄວບຄຸມຫວ່າງເປົ່າ. | No power or faulty power adapter. | Check power outlet and power adapter connection. Ensure the 24VAC terminals are correctly wired. |
| Stations are not watering. | Controller is in OFF mode; incorrect programming; faulty wiring; rain sensor activated. | Turn dial to AUTO. Verify program settings (start times, run times, frequency). Check wiring to valves. Check if rain sensor is wet or activated. |
| Only some stations are watering. | Faulty valve; wiring issue to specific station; power limitation exceeded. | Check wiring for the non-watering stations. Test the valve manually. Ensure total current draw does not exceed 500mA (max 150mA per valve). |
| Controller resets or behaves erratically. | Power fluctuations; internal fault; excessive current draw. | ຮັບປະກັນການສະຫນອງພະລັງງານທີ່ຫມັ້ນຄົງ. Verify that the total current draw from active valves does not exceed 500mA. If problems persist, contact support. |
9. ຂໍ້ມູນຈໍາເພາະ
- ຍີ່ຫໍ້: ວົງໂຄຈອນ
- ຕົວແບບ: 94886
- ຈໍານວນສະຖານີ: 6
- ການຕິດຕັ້ງ: ພາຍໃນ
- ການປ້ອນຂໍ້ມູນພະລັງງານ: 24 Volt AC
- Max Current per Valve: 150mA (0.15A)
- Max Total Current: 500mA (0.5A)
- ຂະໜາດສິນຄ້າ (LxWxH): 14.6ຊມ x 6.2ຊມ x 23.5ຊມ
- ວັດສະດຸ: ພາດສະຕິກ
- ປະເພດການສະແດງ: ຈໍ LCD
- ອຸນຫະພູມປະຕິບັດການ: 10 Degrees Celsius (minimum, typical operating range is wider)
- ຄວາມເຂົ້າກັນໄດ້ຂອງເຮືອນອັດສະລິຍະ: ບໍ່ເຂົ້າກັນໄດ້
- UPC: 046878941267
10. ການຮັບປະກັນ
The Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller comes with a ການຮັບປະກັນ 3 ປີຈໍາກັດ from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or exceeding the specified electrical current limits.
11. ສະຫນັບສະຫນູນ
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Orbit customer support. You can typically find contact information on the Orbit webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.
Orbit Worldwide Webເວັບໄຊ: www.orbitonline.com