ແນະນຳ
The AEG PST 500 X Jigsaw is a robust and versatile electric power tool designed for cutting various materials, primarily wood. Featuring a powerful 440-watt motor and the convenient Fixtec blade change system, this jigsaw offers efficient and precise cutting performance. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your AEG PST 500 X Jigsaw. Please read these instructions carefully before operating the tool and keep them for future reference.
ຄໍາແນະນໍາຄວາມປອດໄພທົ່ວໄປ
ໃຫ້ປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເມື່ອໃຊ້ເຄື່ອງມືໄຟຟ້າເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຂອງໄຟໄໝ້, ໄຟຟ້າຊັອດ, ແລະ ການບາດເຈັບສ່ວນຕົວ.
- ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ບ່ອນເຮັດວຽກຂອງເຈົ້າໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
- ຄວາມປອດໄພທາງໄຟຟ້າ: ປລັກເຄື່ອງມືໄຟຟ້າຕ້ອງກົງກັບປລັກສຽບໄຟ. ບໍ່ເຄີຍດັດແປງປລັກສຽບໃນທາງໃດກໍ່ຕາມ. ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນເຊັ່ນ: ທໍ່, radiators, ຂອບເຂດ, ແລະຕູ້ເຢັນ.
- ຄວາມປອດໄພສ່ວນຕົວ: ໃສ່ເຄື່ອງປ້ອງກັນຕາສະເໝີ. ໃຊ້ການປ້ອງກັນການໄດ້ຍິນໃນເວລາທີ່ປະຕິບັດການສໍາລັບໄລຍະເວລາຂະຫຍາຍ. ແຕ່ງຕົວໃຫ້ຖືກຕ້ອງ; ຫຼີກລ້ຽງການນຸ່ງຫົ່ມຫຼືເຄື່ອງປະດັບ. ຮັບປະກັນຜົມຍາວ.
- ການນໍາໃຊ້ແລະການດູແລເຄື່ອງມື: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດປລັກສຽບອອກຈາກແຫຼ່ງພະລັງງານກ່ອນທີ່ຈະເຮັດການປັບ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
- ຄວາມປອດໄພຂອງ Jigsaw ສະເພາະ: ໃຫ້ແນ່ໃຈວ່າ workpiece ໄດ້ຢ່າງປອດໄພ clamped. Keep hands away from the cutting area. Wait for the blade to stop completely before setting the tool down.
ສິນຄ້າເກີນview
Familiarize yourself with the components of your AEG PST 500 X Jigsaw.
ຮູບ 1: ດ້ານຫນ້າ view of the AEG PST 500 X Jigsaw, highlighting the motor housing and blade area.
ຮູບ 2: ຂ້າງ view of the AEG PST 500 X Jigsaw, showing the handle and power cord connection.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ມໍເຕີທີ່ມີປະສິດທິພາບ 440 ວັດ: ສະຫນອງ ample power for various cutting tasks.
- Fixtec Blade Change System: Allows for quick and tool-free blade replacement.
- Adjustable Base Plate: Enables horizontal adjustments for bevel cuts up to 45 degrees.
- ສອງ -Stage Pendulum Action: Selectable pendulum stroke for optimized cutting performance and cleaner results across different materials.
- ຜອດສະກັດຂີ້ຝຸ່ນ: For connecting a dust extraction system to keep the work area clean.
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງໃບເລື່ອຍ
- Ensure the jigsaw is disconnected from the power supply.
- Locate the Fixtec blade clamp ກົນໄກ.
- ຍູ້ແຜ່ນໃບ clamp lever or button (refer to specific tool design) to open the clamp.
- Insert the saw blade into the blade holder with the teeth facing forward. Ensure the blade is fully seated.
- ປ່ອຍແຜ່ນໃບ clamp lever/button to secure the blade. Gently pull on the blade to confirm it is firmly locked in place.
2. Adjusting the Base Plate for Bevel Cuts
- ຕັດການເຊື່ອມຕໍ່ເຄື່ອງມືຈາກການສະຫນອງພະລັງງານ.
- ຄາຍສະກູ ຫຼື ຄານຍົກທີ່ຍຶດແຜ່ນຮອງອອກ.
- Tilt the base plate to the desired angle for bevel cuts (up to 45 degrees). Use the angle scale for precision.
- ຂັນສະກູ ຫຼື ຄານຍົກໃຫ້ແໜ້ນເພື່ອຍຶດແຜ່ນຮອງໃຫ້ຢູ່ໃນຕຳແໜ່ງ.
- Always perform a test cut on scrap material to verify the angle before cutting your main workpiece.
3. ການເຊື່ອມຕໍ່ກັບພະລັງງານ
- Ensure the power switch is in the "OFF" position before plugging in the tool.
- Connect the power cord to a suitable 220 Volt AC power outlet.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ເປີດ / ປິດພະລັງງານ
- To start the jigsaw, press the power switch.
- To stop the jigsaw, release the power switch. Note: Some models may have a lock-on button for continuous operation, which must be disengaged to turn off the tool.
2. Selecting Pendulum Action
ສອງ-ສtage pendulum action allows for faster cutting in softer materials and cleaner cuts in harder materials.
- Higher Pendulum Setting: For faster, more aggressive cuts in wood and softer materials. This setting may result in a rougher cut edge.
- Lower/No Pendulum Setting: For finer, cleaner cuts in wood, plastics, and metals. This setting is slower but provides better control and finish.
- Adjust the pendulum setting using the dedicated lever or dial on the tool.
3. ເຕັກນິກການຕັດ
ສະເຫມີໃຫ້ແນ່ໃຈວ່າ workpiece ໄດ້ຢ່າງປອດໄພ clamped ເພື່ອປ້ອງກັນການເຄື່ອນໄຫວໃນລະຫວ່າງການຕັດ.
Figure 3: User demonstrating cutting a wooden board with the AEG PST 500 X Jigsaw.
Figure 4: Close-up of the AEG PST 500 X Jigsaw in action, performing a cut on wood.
- ເລີ່ມຕັດ: Place the front edge of the base plate flat on the workpiece. Start the tool and allow the blade to reach full speed before slowly guiding it into the material along your marked line.
- ການຕັດຊື່: Maintain steady pressure and guide the tool smoothly along the cutting line. For long straight cuts, consider using a straight edge guide (not included).
- ຕັດເສັ້ນໂຄ້ງ: ໃຊ້ໃບມີດທີ່ແຄບກວ່າເພື່ອໃຫ້ໄດ້ເສັ້ນໂຄ້ງທີ່ແໜ້ນກວ່າ. ຄ່ອຍໆນຳເຄື່ອງມືໄປ, ປ່ອຍໃຫ້ໃບມີດເຄື່ອນໄປຕາມເສັ້ນໂຄ້ງໂດຍບໍ່ຕ້ອງບັງຄັບມັນ.
- ການຕັດ Bevel: After adjusting the base plate angle (as described in Setup), proceed with cutting as usual, ensuring the base plate remains flat on the workpiece.
- Plunge Cuts: For internal cuts without a pilot hole, tilt the tool forward so the front edge of the base plate rests on the workpiece. Start the tool, then slowly lower the rear of the base plate until the blade plunges through the material.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and optimal performance of your jigsaw. Always disconnect the tool from the power supply before performing any maintenance.
- ທໍາຄວາມສະອາດ: Regularly clean the ventilation openings and the blade area to prevent dust buildup. Use a soft brush or compressed air. Do not use water or solvents.
- ການປ່ຽນແຜ່ນໃບ: Replace dull or damaged blades promptly. Refer to the "Installing the Saw Blade" section for proper procedure.
- ສາຍໄຟ: Inspect the power cord for any damage before each use. If damaged, have it repaired by a qualified service technician.
- ການເກັບຮັກສາ: ເກັບຮັກສາຮູບຕໍ່ຈິ๊กຊໍໄວ້ໃນບ່ອນແຫ້ງ, ປອດໄພ, ໃຫ້ໄກຈາກເດັກນ້ອຍ.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງມືບໍ່ເລີ່ມຕົ້ນ. | ບໍ່ມີການສະຫນອງພະລັງງານ; ສາຍໄຟຜິດພາດ; ສະຫຼັບຜິດພາດ. | ກວດເບິ່ງປລັກສຽບໄຟແລະສາຍໄຟ. ຖ້າບັນຫາຍັງຄົງຢູ່, ໃຫ້ຕິດຕໍ່ບໍລິການ. |
| ໃບມີດຕັດບໍ່ໄດ້ຢ່າງມີປະສິດທິພາບ ຫຼື ບໍ່ຕິດ. | Dull or incorrect blade; excessive feed pressure; incorrect pendulum setting. | Replace blade. Reduce feed pressure. Adjust pendulum setting. |
| ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ. | ແຜ່ນໃບຄ້າຍຄືວ່າງ; ໃບມີດເສຍຫາຍ; worn ອົງປະກອບພາຍໃນ. | Ensure blade is securely installed. Replace blade. If problem persists, contact service. |
| ການຕັດບໍ່ຖືກຕ້ອງ. | Loose base plate; incorrect blade; workpiece not secured. | Tighten base plate. Use appropriate blade. Secure workpiece firmly. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | AEG |
| ໝາຍເລກຕົວແບບ | 4935428260 (PST 500 X) |
| ແຫຼ່ງພະລັງງານ | ໄຟຟ້າສາຍ |
| ວັດtage | 440 ວັດ |
| ສະບັບtage | 220 ໂວນ |
| ຄວາມໄວ | 3700 RPM |
| ຄວາມຍາວຂອງເສັ້ນເລືອດຕັນ | 15 ມມ |
| ວັດສະດຸແຜ່ນໃບ | Aluminum, Metal, Steel |
| ພື້ນຜິວທີ່ແນະນໍາ | ໄມ້ |
| ການຕັດມຸມ | ເຖິງ 45 ອົງສາ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 29L x 19B x 9H ຊັງຕີແມັດ |
| ນ້ໍາຫນັກລາຍການ | 2.88 ກິໂລກຣາມ |
| ຄຸນນະສົມບັດພິເສດ | Saw blade included, Dust extraction connection |
| ການຢັ້ງຢືນ | CE |
Note: The specification for "Included components: Battery" in the source data appears to be an error, as this is a corded electric tool and operates via an electrical cable.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຂໍ້ມູນການຮັບປະກັນ
The AEG PST 500 X Jigsaw comes with a ການຮັບປະກັນຈໍາກັດ. Please refer to the warranty card included with your product for specific terms and conditions, including coverage duration and limitations.
ການມີອາໄຫຼ່
Spare parts for this product are available in the EU for a period of 5 ປີ ຈາກວັນທີ່ຊື້.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For technical assistance, service, or warranty claims, please contact AEG customer support. Contact information can typically be found on the AEG official website or on the product packaging. When contacting support, please have your model number (PST 500 X or 4935428260) and purchase date available.