Horizon MH-338 Digital Precision Scale User Manual

ສິນຄ້າເກີນview

The Horizon MH-338 is a compact digital precision scale designed for accurate measurements up to 200 grams with a 0.01 gram increment. Its design resembles a computer mouse, offering a discreet and portable solution for various weighing needs.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• 200g Capacity with 0.01g Reading Increment
• High Accuracy and Reliability
• Multiple Weighing Modes (g, oz, ct, gn)
• Tare Function for Net Weight Measurement
• ຄຸນນະສົມບັດການປິດອັດຕະໂນມັດ

ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່ແລະການກວດກາ

Carefully remove all components from the packaging. Inspect the scale for any signs of damage. The package should include the MH-338 scale, two AAA batteries, and this user manual.

Image: Contents of the Horizon MH-338 scale package, including the scale, batteries, and user manual.

2. ການຕິດຕັ້ງຫມໍ້ໄຟ

1. ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານລຸ່ມຂອງຂະຫນາດ.
2. ເລື່ອນຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟເປີດ.
3. ໃສ່ໝໍ້ໄຟ AAA ສອງໜ່ວຍ, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
4. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

Image: The underside of the Horizon MH-338 scale, illustrating the battery compartment for AAA battery installation.

3. ບັນຈຸເຂົ້າຮຽນ

Place the scale on a flat, stable, and vibration-free surface to ensure accurate readings. Avoid placing it near strong electromagnetic fields or extreme temperature changes.

ການດໍາເນີນງານ

1. ເປີດ/ປິດ

• ເພື່ອເປີດໃຊ້ເຄື່ອງວັດແທກ, ກົດປຸ່ມ [ເປີດ/ປິດ] button. The LCD display will illuminate and show "0.00g".
• ເພື່ອປິດເຄື່ອງຊັ່ງ, ກົດປຸ່ມຄ້າງໄວ້ [ເປີດ/ປິດ] button for a few seconds until the display turns off. The scale also features an automatic power-off function after 90 seconds of inactivity to conserve battery life.

ຮູບພາບ: A ລາຍລະອຽດ view of the Horizon MH-338 scale's LCD display and the 'M' (Mode) and 'ON/OFF/T' (Tare/Power) buttons.

2. ການເລືອກຫົວ ໜ່ວຍ

ກົດ [M] (Mode) button to cycle through the available weighing units: grams (g), ounces (oz), carats (ct), and grains (gn). Select the desired unit before weighing.

3. ຟັງຊັນ Tare

The Tare function allows you to subtract the weight of a container, so you only measure the net weight of the contents.

1. ວາງຖັງເປົ່າໃສ່ເວທີຊັ່ງນໍ້າໜັກ.
2. Wait for the display to stabilize, then press the [ON/OFF/T] button. The display will reset to "0.00g" (or the selected unit).
3. ເພີ່ມລາຍການທີ່ຈະຊັ່ງນໍ້າຫນັກໃສ່ຖັງ. ຈໍສະແດງຜົນຈະສະແດງນ້ໍາຫນັກສຸດທິຂອງລາຍການ.

4. ຂັ້ນຕອນການຊັ່ງນໍ້າໜັກ

1. Ensure the scale is on and displaying "0.00g" (or the selected unit).
2. Gently place the item(s) to be weighed onto the center of the stainless steel weighing platform.
3. Wait for the display to stabilize. The stable weight will be shown on the LCD.

Image: The Horizon MH-338 scale in use, demonstrating the weighing of fine powder in its lid and loose tea leaves on the platform.

ການປັບທຽບ

For optimal accuracy, periodic calibration may be required. Refer to the following general steps for calibration. A 200g calibration weight is typically used for this model.

1. Turn the scale ON and wait for it to display "0.00g".
2. ກົດຄ້າງໄວ້ [M] (Mode) button until "CAL" appears on the display, then release.
3. ກົດ [M] button again. The display will flash the required calibration weight (e.g., "200.00g").
4. ວາງນ້ຳໜັກທີ່ຖືກຕ້ອງຕາມມາດຕະຖານ (ເຊັ່ນ 200 ກຣາມ) ໃສ່ຈຸດໃຈກາງຂອງແພລດຟອມຊັ່ງນ້ຳໜັກ.
5. The display will show "PASS" and then return to normal weighing mode, indicating successful calibration. Remove the weight.

Image: The Horizon MH-338 scale displaying "5.00g" with a small calibration weight placed on its stainless steel platform.

ບໍາລຸງຮັກສາ

1. ທໍາຄວາມສະອາດ

ເຊັດຂະຫນາດດ້ວຍ d ເລັກນ້ອຍamp cloth. Do not use abrasive cleaners or immerse the scale in water. Keep the weighing platform clean and free of debris.

2. ການເກັບຮັກສາ

Store the scale in a clean, dry environment at room temperature. Avoid extreme temperatures, humidity, and direct sunlight. If storing for extended periods, remove the batteries to prevent leakage.

3. ການທົດແທນຫມໍ້ໄຟ

When the display shows a low battery indicator (e.g., "Lo"), replace both AAA batteries with new ones to ensure continued accurate operation.

ການແກ້ໄຂບັນຫາ

• "Lo" ຫຼືຕົວຊີ້ວັດຫມໍ້ໄຟຕ່ໍາ: ປ່ຽນແບັດເຕີລີ AAA ໃໝ່.
• "OUE2" or "EEEE": Indicates overload. Remove the item from the platform immediately to prevent damage. The maximum capacity is 200g.
• ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ:
  • ໃຫ້ແນ່ໃຈວ່າຂະຫນາດຢູ່ໃນພື້ນທີ່ຮາບພຽງ, ຄົງທີ່.
  • Check for any obstructions under or around the platform.
  • Recalibrate the scale if necessary.
  • Ensure the ambient temperature is stable.
• ຂະໜາດບໍ່ເປີດ: ກວດສອບການຕິດຕັ້ງແບັດເຕີຣີ ແລະ ຮັບປະກັນວ່າແບັດເຕີຣີໃໝ່ ແລະ ໃສ່ຢ່າງຖືກຕ້ອງ.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.