ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງພິມເລເຊີສີ Xerox 7800/DX Phase

ສິນຄ້າເກີນview

The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

ຮູບ 1: ດ້ານຫນ້າ view of the Xerox 7800/DX Phase Color Laser Printer, showcasing ການອອກແບບຫຼາຍຖາດ ແລະ ແຜງຄວບຄຸມຂອງມັນ.

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. ການຫຸ້ມຫໍ່ແລະການຈັດວາງ

• Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
• Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.

2. ການເຊື່ອມຕໍ່ພະລັງງານ

• ເຊື່ອມຕໍ່ສາຍໄຟກັບເຄື່ອງພິມ ແລະຈາກນັ້ນໄປຫາປສຽບໄຟຟ້າທີ່ມີດິນ.
• ກົດປຸ່ມເປີດປິດເພື່ອເປີດເຄື່ອງພິມ.

3. ການ​ຕິດ​ຕັ້ງ Toner Cartridge

The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.

1. ເປີດແຜງເຂົ້າເຖິງດ້ານໜ້າຂອງເຄື່ອງພິມ.
2. Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
3. ສັ່ນໃສ່ໄສ້ຕອງຄ່ອຍໆເພື່ອແຈກຢາຍນໍ້າສີໃຫ້ເທົ່າກັນ.
4. ໃສ່ຕະຫລັບໝຶກແຕ່ລະອັນເຂົ້າໄປໃນຊ່ອງທີ່ມີລະຫັດສີທີ່ສອດຄ້ອງກັນຈົນກວ່າມັນຈະຄລິກເຂົ້າທີ່.
5. ປິດແຖບການເຂົ້າເຖິງດ້ານຫນ້າ.

ຮູບທີ 2: ຕົວຢ່າງample of an internal printer view, indicating where toner cartridges are typically installed.

4. ການໂຫຼດເຈ້ຍ

The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.

1. Pull out the desired paper tray. The printer has 2 trays as standard.
2. Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
3. Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
4. Gently push the tray back into the printer.
5. Confirm the paper type and size on the control panel if prompted.

5. ຊອບແວແລະການຕິດຕັ້ງໄດເວີ

To enable printing from your computer, install the necessary drivers.

• The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
• ເຂົ້າເບິ່ງຝ່າຍສະໜັບສະໜູນ Xerox ຢ່າງເປັນທາງການ webເວັບໄຊທ໌ເພື່ອດາວໂຫລດໄດເວີຫຼ້າສຸດສໍາລັບລະບົບປະຕິບັດການຂອງທ່ານ.
• ປະຕິບັດຕາມຄໍາແນະນໍາໃນຫນ້າຈໍເພື່ອສໍາເລັດການຕິດຕັ້ງ.
• Connect the printer to your computer via USB or Ethernet cable.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ກະດານຄວບຄຸມຫຼາຍກວ່າview

The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

ຮູບທີ 3: ລາຍລະອຽດ view of the printer's touchscreen control panel, showing various menu options.

2. ການພິມພື້ນຖານ

1. ເປີດເອກະສານທີ່ທ່ານຕ້ອງການພິມໃນຄອມພິວເຕີຂອງທ່ານ.
2. ເລືອກ "ພິມ" ຈາກເມນູຂອງຄໍາຮ້ອງສະຫມັກ.
3. Choose the Xerox 7800/DX printer from the list of available printers.
4. Adjust print settings as needed, such as:
   • Color/Monochrome: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
   • ການພິມສອງຊັ້ນ: ຮອງຮັບການພິມສອງດ້ານອັດຕະໂນມັດ.
   • ແຫຼ່ງເຈ້ຍ: Select the desired paper tray.
   • ສຳເນົາ: ສູງສຸດ 312 ສະບັບຕໍ່ຄັ້ງ.
5. Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.

3. ການເຊື່ອມຕໍ່

• ອີເທີເນັດ: Connect the printer to your network using an Ethernet cable for shared access.
• USB: A single USB 2.0 port is available for direct connection to a computer.

ບໍາລຸງຮັກສາ

1. ການປ່ຽນໝຶກພິມ

When a toner cartridge is low or empty, the printer's control panel will display a notification. Replace cartridges as follows:

1. Open the front access panel.
2. ຄ່ອຍໆເອົາຕະຫຼັບໝຶກພິມທີ່ວ່າງອອກໂດຍການດຶງມັນອອກຊື່ໆ.
3. Unpack a new, genuine Xerox toner cartridge of the correct color.
4. Shake the new cartridge gently.
5. Insert the new cartridge into the corresponding slot until it locks into place.
6. ປິດແຖບການເຂົ້າເຖິງດ້ານຫນ້າ.

2. ທໍາຄວາມສະອາດ

• ພາຍນອກ: ເຊັດພື້ນຜິວພາຍນອກດ້ວຍຜ້າອ່ອນໆ, ງamp, ຜ້າບໍ່ມີ lint. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດ.
• ພາຍໃນ: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.

ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.

ບັນຫາທົ່ວໄປ ແລະການແກ້ໄຂ:

• ເຄື່ອງພິມບໍ່ຕອບສະໜອງ:
  • ກວດເບິ່ງການເຊື່ອມຕໍ່ໄຟຟ້າ ແລະໃຫ້ແນ່ໃຈວ່າເຄື່ອງພິມເປີດຢູ່.
  • ຢືນຢັນການເຊື່ອມຕໍ່ເຄືອຂ່າຍ ຫຼືສາຍ USB.
  • ຣີສະຕາດທັງເຄື່ອງພິມ ແລະຄອມພິວເຕີຂອງທ່ານ.
  • ໃຫ້ແນ່ໃຈວ່າໄດເວີເຄື່ອງພິມຖືກຕິດຕັ້ງແລະເລືອກ.
• ຄຸນນະພາບການພິມບໍ່ດີ:
  • ກວດເບິ່ງລະດັບຂອງຫມຶກແລະປ່ຽນຫມຶກຕ່ໍາໃດໆ.
  • Perform a print head cleaning or calibration from the control panel.
  • ໃຫ້ແນ່ໃຈວ່າທ່ານກໍາລັງໃຊ້ເຈ້ຍທີ່ເຫມາະສົມສໍາລັບການຕັ້ງຄ່າການພິມຂອງທ່ານ.
• ເຈ້ຍຕິດ:
  • Follow the on-screen instructions on the control panel to locate and clear the jam.
  • ໃຫ້ແນ່ໃຈວ່າກະດາດຖືກໂຫລດຢ່າງຖືກຕ້ອງແລະບໍ່ເຕັມໃສ່ຖາດ.
  • ເອົາສິ່ງຂອງຕ່າງປະເທດອອກຈາກເສັ້ນທາງເຈ້ຍ.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox webເວັບໄຊ.

ໝາຍເຫດສຳຄັນ: All returns must be authorized by Xerox Corp. No exceptions.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official webເວັບໄຊ.

ທ່ານສາມາດຊອກຫາຂໍ້ມູນເພີ່ມເຕີມແລະຊັບພະຍາກອນສະຫນັບສະຫນູນກ່ຽວກັບ ຮ້ານ Xerox ໃນ Amazon ຫຼື ບໍລິສັດ Xerox ຫຼັກ webເວັບໄຊ.