Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller

1. ບົດແນະນຳ

This manual provides instructions for the installation, operation, and maintenance of your Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This controller is designed to manage residential 24-volt sprinkler systems, offering dual programming capabilities and a rain delay feature.

Image 1.1: The Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This image displays the front panel of the controller, featuring its digital display and control buttons.

2. ຂໍ້ມູນຄວາມປອດໄພ

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or personal injury.

• This controller is designed for indoor use only. Do not install outdoors or in areas exposed to water.
• ໃຫ້ແນ່ໃຈວ່າການປິດການສະຫນອງພະລັງງານກ່ອນທີ່ຈະດໍາເນີນການສາຍຫຼືການບໍາລຸງຮັກສາ.
• All electrical wiring should comply with local codes and regulations. If you are unsure, consult a qualified electrician.
• ຢ່າພະຍາຍາມສ້ອມແປງເຄື່ອງດ້ວຍຕົນເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.

3. ຕັ້ງຄ່າ

3.1 ການຫຸ້ມຫໍ່

Carefully remove the controller from its packaging. Verify that all components are present. Retain packaging for future use or disposal.

3.2 ການຕິດຕັ້ງຕົວຄວບຄຸມ

1. Choose a suitable indoor location near a standard 120V AC outlet and away from direct sunlight or extreme temperatures.
2. Use the provided mounting template (if applicable) or mark the desired screw locations on the wall.
3. Install mounting screws into the wall, leaving the screw heads slightly extended.
4. Hang the controller onto the screws using the keyhole slots on the back of the unit.
5. Secure the controller by tightening the screws.

3.3 ສາຍໄຟ

ສຳຄັນ: ຕັດໄຟກ່ອນຕັດສາຍ.

1. ການເຊື່ອມຕໍ່ພະລັງງານ: Plug the controller's power cord into a standard 120V AC outlet.
2. Valve Wiring: Connect one wire from each sprinkler valve to a numbered terminal (1, 2, 3, 4) on the controller. Connect the common wire from all valves to the terminal labeled 'C' (Common).
3. Sensor Wiring (Optional): If using a rain sensor, connect its wires to the designated sensor terminals. Refer to your sensor's manual for specific wiring instructions.

3.4 ການເປີດພະລັງງານເບື້ອງຕົ້ນ

Once all wiring is complete and secure, connect the power cord to the electrical outlet. The controller display should illuminate, indicating it is powered on.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 Understanding the Display and Buttons

The controller features a digital display and several buttons for navigation and programming. Familiarize yourself with the 'Program', 'Set', 'Arrow' (up/down), and 'Rain Delay' buttons.

4.2 ການຕັ້ງເວລາ ແລະ ວັນທີປັດຈຸບັນ

1. Press the 'Set' button repeatedly until 'Set Time' appears on the display.
2. Use the 'Arrow' buttons to adjust the hour, then press 'Set' to move to minutes.
3. Repeat for minutes, AM/PM, year, month, and day.

4.3 ການຂຽນໂປຣແກຣມຕາຕະລາງການຫົດນໍ້າ

The controller supports dual programs (A and B) for flexible scheduling.

1. ເລືອກໂຄງການ: Press the 'Program' button to select Program A or B.
2. ກຳນົດເວລາເລີ່ມຕົ້ນ: Press 'Set' until 'Start Time' appears. Use 'Arrow' buttons to set the desired start time for the first cycle. The controller supports multiple start times per program.
3. ກຳນົດເວລາແລ່ນ: Press 'Set' until 'Run Time' appears. Use 'Arrow' buttons to set the duration (in minutes) for each station (1-4).
4. ກຳນົດມື້ຫົດນ້ຳ: Press 'Set' until 'Watering Days' appears. Use 'Arrow' buttons to select specific days of the week, odd/even days, or interval watering.

4.4 ການປະຕິບັດຄູ່ມື

To manually water a station or all stations:

1. Press the 'Manual' button (if available, or follow specific manual run instructions in the display menu).
2. Select the desired station or 'All Stations'.
3. Set the run time using the 'Arrow' buttons.
4. The selected station(s) will begin watering immediately.

4.5 ຟັງຊັນການເລື່ອນຝົນ

The rain delay feature allows you to pause watering for a set period without losing your programmed schedule.

1. Press the 'Rain Delay' button.
2. Use the 'Arrow' buttons to select the delay duration (e.g., 24, 48, or 72 hours).
3. The controller will pause watering for the selected period and resume the schedule automatically afterward.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

ເຊັດດ້ານນອກຂອງຕົວຄວບຄຸມດ້ວຍຄວາມອ່ອນໂຍນ, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍຈໍສະແດງຜົນຫຼື casing.

5.2 Seasonal Considerations

As an indoor controller, the unit is not directly exposed to outdoor elements. However, ensure the indoor environment remains within recommended operating temperatures to prolong its lifespan.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

• ຕົວແບບ: Orbit 27954 Pocket Star 4-Station Plus Indoor Controller
• ຍີ່ຫໍ້: ວົງໂຄຈອນ
• ເລກສ່ວນ: 27954
• ຈໍາ​ນວນ​ສະ​ຖາ​ນີ​: 4
• ສະບັບtage: 24 ໂວນ (AC)
• ການໂຕ້ຕອບຂອງມະນຸດ: ປຸ່ມ
• ແບັດເຕີຣີທີ່ຕ້ອງການ: ບໍ່
• ການຕິດຕັ້ງ: ພາຍໃນ
• ຄຸນສົມບັດ: Dual program, Rain delay
• ຂະໜາດແພັກເກດ: 21.84 x 13.46 x 6.6 cm
• ນ້ຳໜັກ: 226.8 g

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the official Orbit webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.