Silverline 441563 Silverstorm 190mm 350W Bandsaw Instruction Manual

1. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ອ່ານ ແລະເຂົ້າໃຈທຸກຄຳເຕືອນຄວາມປອດໄພ, ຄຳແນະນຳ, ຮູບປະກອບ, ແລະຂໍ້ມູນສະເພາະທີ່ສະໜອງໃຫ້ກັບເຄື່ອງມືພະລັງງານນີ້. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ແລະ / ຫຼືການບາດເຈັບທີ່ຮ້າຍແຮງ.

• ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
• ຄວາມປອດໄພທາງໄຟຟ້າ: ປລັກເຄື່ອງມືໄຟຟ້າຕ້ອງກົງກັບປລັກສຽບໄຟ. ບໍ່ເຄີຍດັດແປງປລັກສຽບໃນທາງໃດກໍ່ຕາມ. ຫ້າມໃຊ້ປລັກສຽບອະແດບເຕີໃດໆກັບເຄື່ອງມືໄຟຟ້າທີ່ມີພື້ນດິນ. ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນ.
• ຄວາມປອດໄພສ່ວນຕົວ: Always wear eye protection, hearing protection, and a dust mask when operating the bandsaw. Secure loose clothing, jewelry, and long hair. Do not overreach. Maintain proper footing and balance at all times.
• ການນໍາໃຊ້ ແລະການດູແລເຄື່ອງມືພະລັງງານ: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດປລັກສຽບອອກຈາກແຫຼ່ງພະລັງງານກ່ອນທີ່ຈະເຮັດການປັບ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
• Bandsaw Specific Safety: Ensure the blade is correctly tensioned and aligned before operation. Keep hands clear of the blade path. Use push sticks when cutting small pieces. Never remove cut material until the blade has come to a complete stop.

2. ຜະລິດຕະພັນເກີນview

The Silverline 441563 Silverstorm Bandsaw is designed for precise cutting of wood and similar materials. It features a robust construction and adjustable components for versatile use.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Maximum cutting depth of 80 mm and width of 190 mm.
• Powerful 350W induction motor for consistent performance.
• Work table dimensions of 300 x 300 mm.
• Includes a 1425 mm 6 TPI (teeth per inch) blade.
• Table tilt function for bevel cuts.
• Equipped with a dust extraction port for a cleaner work environment.

ອົງປະກອບ:

The bandsaw includes the main unit, a blade, a rip fence, a dust extraction port, and a miter gauge for angled cuts.

3. ຕັ້ງຄ່າ

3.1 ການຫຸ້ມຫໍ່ແລະການປະກອບ

1. ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. Place the bandsaw on a stable, level workbench.
3. Attach the work table to the main unit, ensuring it is securely fastened and level.
4. Install the rip fence and miter gauge as per the diagrams in the full manual.

3.2 ການຕິດຕັ້ງໃບມີດ ແລະ ການດຶງ

The bandsaw typically comes with a blade pre-installed. However, for replacement or initial setup, follow these steps:

1. Ensure the power cord is disconnected.
2. Open the blade covers.
3. Carefully place the blade around the upper and lower wheels, ensuring the teeth point downwards towards the table.
4. Adjust the blade tensioning knob until the blade is taut but not overly stressed. Refer to the tension indicator if available.
5. Adjust the blade guides (both upper and lower) so they are close to, but not touching, the blade sides. The rear thrust bearing should be just behind the blade.
6. Close the blade covers securely.

3.3 ການເຊື່ອມຕໍ່ພະລັງງານ

Connect the bandsaw to a suitable 230 Volt power supply. If the power plug is not compatible with your local outlets (e.g., a UK plug), use an appropriate and certified adapter.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການດໍາເນີນງານພື້ນຖານ

1. ຮັບປະກັນຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພທັງໝົດຖືກປະຕິບັດຕາມ.
2. Turn on the bandsaw using the power switch. Allow the blade to reach full speed before beginning a cut.
3. Gently feed the workpiece into the blade, applying steady, even pressure. Do not force the material.
4. Guide the material smoothly through the blade, following your marked line.
5. Once the cut is complete, turn off the bandsaw and wait for the blade to stop completely before removing the workpiece or offcuts.

4.2 ການນໍາໃຊ້ຮົ້ວ Rip

The rip fence is used for making straight, parallel cuts. Adjust the fence to the desired width from the blade and secure it firmly.

4.3 ການ​ນໍາ​ໃຊ້ Miter Gauge

The miter gauge allows for accurate angled cuts. Insert the miter gauge into the slot on the work table, set the desired angle, and lock it in place. Use it to guide the workpiece for cross-cuts or angled cuts.

4.4 ຕັດ Bevel

The work table can be tilted to make bevel cuts. Loosen the table locking mechanism, adjust the table to the desired angle (up to 45 degrees), and re-secure the lock. Always perform a test cut on scrap material to verify the angle.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and safe operation of your bandsaw.

5.1 ການທໍາຄວາມສະອາດ

• ສະເຫມີຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະທໍາຄວາມສະອາດ.
• Regularly clear sawdust and debris from the work table, blade area, and motor vents.
• Utilize the dust extraction port by connecting it to a suitable vacuum system to minimize airborne dust.

5.2 ການປ່ຽນແຜ່ນໃບ

Replace dull or damaged blades promptly. Follow the blade installation steps in Section 3.2 in reverse to remove the old blade, then install the new one. Ensure the new blade is the correct size (1425 mm) and type for your application.

5.3 ການປັບຄູ່ມືໃບມີດ

Periodically check and adjust the blade guides and thrust bearings to ensure they provide proper support without binding the blade. Incorrect adjustment can lead to poor cut quality and premature blade wear.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

• ຜູ້ຜະລິດ: ສີເງິນ
• ໝາຍເລກຕົວແບບ: 441563 (919366)
• ການປ້ອນຂໍ້ມູນພະລັງງານ: 350W
• ສະບັບtage: 230 Volt
• ຄວາມເລິກການຕັດສູງສຸດ: 80 ມມ
• ຄວາມກວ້າງການຕັດສູງສຸດ: 190 ມມ
• ຄວາມຍາວຂອງແຜ່ນໃບ: 1425 ມມ
• ວັດສະດຸແຜ່ນ: ເຫຼັກຄວາມໄວສູງ
• ຂະໜາດຕາຕະລາງ: 300 x 300 ມມ
• ຄວາມໄວບໍ່ມີການໂຫຼດ: 5000 RPM
• ນ້ຳໜັກ: 15.5 ກິ​ໂລ
• ການຢັ້ງຢືນ: CE, UKCA
• ອົງປະກອບລວມ: Blade, rip fence, dust extraction port, miter gauge

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or to purchase replacement parts, please contact Silverline customer service or refer to the official Silverline webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

ຜູ້ຜະລິດ: ສີເງິນ

Webເວັບໄຊ: www.silverlinetools.com