Aiphone JE-1F-T Monitor Extension Unit Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The Aiphone JE-1F-T is a monitor extension unit designed to expand your existing Aiphone JE series intercom system. It features a 3.5-inch TFT color LCD monitor, providing clear visual communication. This unit is compatible with JIS 1-gang switch boxes for easy installation.

Please note that internal communication between this extension unit and the master unit, or between multiple indoor units, is not supported. The system supports a maximum configuration of one entrance station and one master unit plus one extension unit.

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the Aiphone JE-1F-T Monitor Extension Unit, showing the 3.5-inch color display and control buttons.

2. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

2.1 ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

• ໃຫ້ແນ່ໃຈວ່າໄຟຟ້າໄດ້ຖືກຕັດກ່ອນການຕິດຕັ້ງເພື່ອປ້ອງກັນໄຟຟ້າຊັອດ.
• Installation should be performed by a qualified professional.
• ຫ້າມໃຫ້ເຄື່ອງຖືກນ້ຳ ຫຼື ຄວາມຊຸ່ມຊື່ນຫຼາຍເກີນໄປ.

2.2 ການຕິດຕັ້ງ

1. Prepare a standard JIS 1-gang switch box in the desired indoor location.
2. Ensure sufficient space for wiring connections behind the unit.

2.3 ສາຍໄຟ

The JE-1F-T unit uses an AC power direct connection. Connect the power supply wires (AC100V 50/60Hz) according to local electrical codes and the wiring diagram provided in the full installation guide (not included in this manual). Connect the communication wires to the master unit as specified in your system's wiring instructions.

• Connect AC power (100V, 50/60Hz) directly to the unit.
• Connect the communication lines from the master unit.
• Secure all connections properly to prevent disconnections.

3. ການດໍາເນີນງານ

3.1 ການຮັບສາຍ

• When a visitor presses the call button at the entrance station, the monitor will activate and an audible chime will sound.
• Press the 'Talk' button on the JE-1F-T unit to establish two-way audio communication with the visitor.
• To end the conversation, press the 'Talk' button again or the call will automatically terminate after a set period.

3.2 Monitoring the Entrance

• ເຖິງ view the entrance station without a call, press the 'Monitor' button. The display will show the live video feed.
• Press the 'Monitor' button again to turn off the display.

3.3 ຊ່ອງເປີດປະຕູ (ຖ້າເຊື່ອມຕໍ່ແລ້ວ)

• During a conversation with a visitor, press the 'Door Release' button to unlock the entrance door.
• Ensure the door release mechanism is properly installed and configured with your master unit.

4. ບໍາລຸງຮັກສາ

4.1 ການທໍາຄວາມສະອາດ

• ເຊັດເຄື່ອງດ້ວຍຜ້າອ່ອນ, ແຫ້ງ.
• ສໍາລັບຝຸ່ນ stubborn, ເລັກນ້ອຍ dampen ຜ້າ​ທີ່​ມີ​ນ​້​ໍ​າ​ແລະ​ຫຼັງ​ຈາກ​ນັ້ນ​ເຊັດ​ໃຫ້​ແຫ້ງ​.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.

4.2 ການເບິ່ງແຍງທົ່ວໄປ

• ຫຼີກ​ລ້ຽງ​ການ​ວາງ​ເຄື່ອງ​ຢູ່​ໃນ​ບ່ອນ​ຖືກ​ແສງ​ແດດ​ໂດຍ​ກົງ ຫຼື​ໃກ້​ກັບ​ແຫຼ່ງ​ຄວາມ​ຮ້ອນ.
• Do not drop or subject the unit to strong impacts.

5. ການແກ້ໄຂບັນຫາ

5.1 No Power to the Unit

• Check if the AC power supply is connected correctly and if the circuit breaker is not tripped.
• ກວດ​ສອບ​ວ່າ​ປ່ຽງ​ໄຟ​ແມ່ນ​ເຮັດ​ວຽກ​ໄດ້​.

5.2 No Video Display

• Ensure all communication wires are securely connected between the entrance station, master unit, and extension unit.
• Confirm that the entrance station camera lens is clean and unobstructed.

5.3 No Audio During Call

• Check communication wiring for loose connections.
• Ensure the 'Talk' button is pressed during conversation.

5.4 Cannot Communicate Between Indoor Units

ດັ່ງທີ່ໄດ້ລະບຸໄວ້ໃນຜະລິດຕະພັນຂ້າງເທິງview, the Aiphone JE-1F-T does not support internal communication between indoor units or with the master unit. This is a design specification of the product.

If problems persist after attempting these troubleshooting steps, please contact your installer or Aiphone customer support.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation included with your purchase or contact your authorized Aiphone dealer or the Aiphone customer service directly. Please have your product model number (JE-1F-T) and purchase date available when contacting support.