ຄູ່ມືຜູ້ໃຊ້ໄຟສາຍອາລູມີນຽມ STANLEY FATMAX 1-95-152

ແນະນຳ

This manual provides essential instructions for the safe and effective use, setup, and maintenance of your STANLEY FATMAX 1-95-152 Aluminium Torch. Please read this manual thoroughly before operating the device and retain it for future reference.

ຂໍ້ມູນຄວາມປອດໄພ

• ຢ່າເບິ່ງໂດຍກົງໃສ່ໄຟ LED.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• ຢ່າຜະສົມແບດເຕີຣີເກົ່າແລະໃຫມ່, ຫຼືແບດເຕີລີ່ປະເພດຕ່າງໆ.
• Remove batteries if the torch will not be used for an extended period.
• ຖິ້ມແບດເຕີລີ່ຕາມກົດລະບຽບທ້ອງຖິ່ນ.
• Do not attempt to disassemble or modify the torch.

ເນື້ອໃນຊຸດ

• STANLEY FATMAX Aluminium Torch
• Requires 3 x AAA Alkaline Batteries (not included)

ຕັ້ງຄ່າ

ການຕິດຕັ້ງຫມໍ້ໄຟ

1. Unscrew the tail cap of the torch by turning it counter-clockwise.
2. Insert three (3) AAA alkaline batteries into the battery holder, ensuring correct polarity (+/-).
3. Place the battery holder with the installed batteries into the torch body.
4. ຂັນຝາປິດຫາງກັບຄືນຕາມເຂັມໂມງຈົນກວ່າຈະແໜ້ນດີ.

ຄໍາແນະນໍາການດໍາເນີນງານ

ເປີດ/ປິດ

Press the button located on the tail cap to turn the torch on. Press the button again to turn the torch off.

ການປັບຕົວ Beam

The head of the torch can be rotated to adjust the focus of the light beam. Rotate the head clockwise or counter-clockwise to achieve a wider floodlight or a more focused spotlight.

ບໍາລຸງຮັກສາ

ທໍາຄວາມສະອາດ

Wipe the torch body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the lens is clean for optimal light output.

ການປ່ຽນແບັດ

When the light output diminishes, replace the AAA batteries following the installation steps in the "Setup" section. Always replace all three batteries at the same time with new, fresh alkaline batteries.

ການເກັບຮັກສາ

Store the torch in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the torch.

ການແກ້ໄຂບັນຫາ

• Torch does not turn on:
  • ກວດເບິ່ງວ່າໃສ່ແບັດເຕີລີ່ຖືກໃສ່ຢ່າງຖືກຕ້ອງກັບຂົ້ວທີ່ຖືກຕ້ອງຫຼືບໍ່.
  • Ensure batteries are fresh and not depleted.
  • Verify the tail cap is securely tightened.
• ແສງ​ສະ​ຫວ່າງ​ຫຼື flickers​:
  • ປ່ຽນແບັດໃໝ່.
  • ລ້າງ​ການ​ຕິດ​ຕໍ່​ແບດ​ເຕີ​ລີ່​ແລະ​ຢູ່​ປາຍ​ຍອດ​.
  • ຮັບປະກັນວ່າເລນສະອາດ.
• ການປັບລຳແສງແມ່ນແຂງກະດ້າງ:
  • Gently clean any debris from the head mechanism.
  • Avoid forcing the adjustment.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the official STANLEY FATMAX webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.