Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາດ້ານຄວາມປອດໄພເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍຕໍ່ຊັບສິນ, ການບາດເຈັບສ່ວນຕົວ, ຫຼື ການເສຍຊີວິດ.

• ປິດແຫຼ່ງນ້ຳສະເໝີກ່ອນເລີ່ມເຮັດວຽກປະປາໃດໆ.
• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ, ເຊັ່ນ: ແວ່ນຕາຄວາມປອດໄພແລະຖົງມື, ໃນລະຫວ່າງການຕິດຕັ້ງ.
• ຮັບປະກັນວ່າການເຊື່ອມຕໍ່ທັງໝົດແມ່ນປອດໄພ ແລະ ກັນນ້ຳເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
• ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບພາກສ່ວນໃດນຶ່ງຂອງຂະບວນການຕິດຕັ້ງ, ໃຫ້ປຶກສາກັບຊ່າງທໍ່ນໍ້າທີ່ມີຄຸນວຸດທິ.
• ຮັກສາສ່ວນນ້ອຍໆໃຫ້ໄກຈາກມືຂອງເດັກນ້ອຍເພື່ອປ້ອງກັນອັນຕະລາຍຈາກການສຳຜັດ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• ເຄື່ອງຂັດສະແຕນເລດ
• 27" stainless steel cable (Teflon coated)
• ເຄື່ອງມືຕິດຕັ້ງ
• Gaskets and fasteners

4. ຂໍ້ມູນຈໍາເພາະ

5. ການຕິດຕັ້ງ

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 ເຄື່ອງມືທີ່ຕ້ອງການ

• ຜ້າປິດປາກຫຼືຊິລິໂຄນຂອງຊ່າງປະປາ
• Adjustable wrench or channel locks
• Screwdriver (Phillips ແລະ flathead)
• ເທບວັດແທກ
• ແວ່ນຕາຄວາມປອດໄພ ແລະຖົງມື

5.2 ການຕິດຕັ້ງຂັ້ນຕອນໂດຍຂັ້ນຕອນ

1. ການກຽມອ່າງອາບນ້ຳ: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. ຕິດຕັ້ງເກີບລະບາຍນ້ຳ: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. ຕິດຕັ້ງຊຸດ Overflow: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. ເຊື່ອມຕໍ່ສາຍ: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. ການ​ທົດ​ສອບ​ສໍາ​ລັບ​ການ​ຮົ່ວ​ໄຫລ​: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. ການດໍາເນີນງານ

The Geberit PushControl system is designed for simple and intuitive operation.

• ເພື່ອ​ປິດ​ທໍ່​ລະບາຍ​ນໍ້າ: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• ເພື່ອເປີດ Drain: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. ບໍາລຸງຮັກສາ

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Cleaning the Trim: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• ການກວດສອບສາຍ: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. ການແກ້ໄຂບັນຫາ

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webເວັບໄຊ.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Webເວັບໄຊ: www.geberit.com
• ບໍລິການລູກຄ້າ: Refer to the Geberit webສະຖານທີ່ສໍາລັບຂໍ້ມູນຕິດຕໍ່ພາກພື້ນ.

ໃນ​ເວ​ລາ​ທີ່​ຕິດ​ຕໍ່​ຫາ​ສະ​ຫນັບ​ສະ​ຫນູນ​, ກະ​ລຸ​ນາ​ມີ​ຈໍາ​ນວນ​ຜະ​ລິດ​ຕະ​ພັນ​ຂອງ​ທ່ານ (151.603​) ແລະ​ວັນ​ທີ​ການ​ຊື້​ທີ່​ມີ​ຢູ່​.