Behringer DJX400

ແນະນຳ

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

ດ້ານໜ້າ view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

ຕັ້ງຄ່າ

Follow these steps to properly set up your DJX400 mixer.

1. ການຫຸ້ມຫໍ່ແລະການກວດກາ

• ເອົາເຄື່ອງປະສົມອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
• Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
• Ensure all accessories, including the power cable, are present.

2. ການເຊື່ອມຕໍ່ແຫຼ່ງສຽງ

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. ການເຊື່ອມຕໍ່ຜົນໄດ້ຮັບສຽງ

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC Output (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. ການເຊື່ອມຕໍ່ພະລັງງານ

• ໃຫ້ແນ່ໃຈວ່າສະວິດໄຟຂອງເຄື່ອງປະສົມຢູ່ໃນຕໍາແຫນ່ງ OFF.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

ປະຕິບັດການ

This section details the functions of the DJX400's controls and how to operate the mixer.

1. ການຄວບຄຸມຊ່ອງ

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• GAIN ຄວບຄຸມ: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• CHANNEL FADER: Controls the volume level of the individual channel.
• PFL (Pre-Fader Listen) Button: Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. ກາບກອນ

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• CROSSFADER: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. ພາກສ່ວນຫຼັກ

• ລະດັບປະລິນຍາໂທ: Controls the overall output volume of the mixer to the main PA system.
• BOOTH LEVEL: Adjusts the volume of the BOOTH output for your monitor speakers.
• ລະດັບ MIC: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• ລະດັບຫູຟັງ: ປັບລະດັບສຽງອອກຂອງຫູຟັງ.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. ຕົວນັບ BPM

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

ທໍາຄວາມສະອາດ

• Always disconnect the mixer from power before cleaning.
• ໃຊ້ຜ້າແພທີ່ອ່ອນ, ແຫ້ງ, ບໍ່ມີສານດ່າງເພື່ອເຊັດພື້ນຜິວພາຍນອກ.
• ສໍາລັບຝຸ່ນ stubborn, a ເລັກນ້ອຍ damp ຜ້າທີ່ມີສະບູອ່ອນສາມາດໃຊ້ໄດ້, ປະຕິບັດຕາມດ້ວຍຜ້າແຫ້ງ.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

ການເກັບຮັກສາ

• ເມື່ອບໍ່ໄດ້ໃຊ້ງານ, ໃຫ້ເກັບຮັກສາເຄື່ອງປະສົມໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງສຸດ.
• Protect the mixer from dust by covering it with a dust cover.

ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter with your DJX400 mixer.

ຂໍ້ມູນຈໍາເພາະ

Key technical specifications for the Behringer DJX400 DJ Mixer:

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຜະລິດຕະພັນ Behringer ຖືກອອກແບບມາເພື່ອຄວາມໜ້າເຊື່ອຖື ແລະ ປະສິດທິພາບ. ສຳລັບຂໍ້ມູນການຮັບປະກັນລະອຽດ ແລະ ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເຖິງ Behringer ຢ່າງເປັນທາງການ webເວັບໄຊ ຫຼືຕິດຕໍ່ຕົວແທນຈໍາໜ່າຍທີ່ໄດ້ຮັບອະນຸຍາດໃນທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

• ສະຫນັບສະຫນູນອອນໄລນ໌: ຢ້ຽມຊົມ Behringer ຢ່າງເປັນທາງການ website for FAQs, software downloads, and support resources.
• ສູນບໍລິການ: Locate authorized service centers for repairs and maintenance.